Cookies erleichtern die Bereitstellung unserer Dienste. Mit der Nutzung unserer Dienste erklären Sie sich damit einverstanden, dass wir Cookies verwenden.
Weitere Informationen
  • About us

    For more customer proximity:
    ERWEKA in North America!

    Catering to the needs of our North American customers.

    As a leading, international manufacturer of test equipment for the pharmaceutical industry, ERWEKA is serving the North American market from New Jersey. From our office with demo room, we supply tablet test equipment for larger pharmaceutical and life sciences companies, resarch and test laboratories and universities all over the United States of America and Canada.

    Our highly trained, North American service technicians can cater to all customers needs, from west to east coast. If you are curious and what to see our devices in action, call us and make an appointment in our demo room, including RoboDis II demos.

    ERWEKA America Inc.
    31 Northfield Avenue
    Edison, NJ08837
    United States of America

    Call us: +1 (732) 662 1143
    E-mail: Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein!

    Service: +1 (732) 515-9564
    Service e-mail: Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein!


    Dissolution Product Range:
    From USP 1 to USP 7, from manual to fully automated.

    No matter what dissolution testing requirements you have, we have the device for it.

    USP 1 7
     

     
     
    • USP 1, 2, 5 and 6 - Manual Testing

      USP 1, 2, 5 and 6 - Manual Testing

      We offer various Dissolution Tester for manual USP 1, 2, 5 and 6 testing such as the entry level DT 126 light, DT 128 light or DT 1212 light.

      For more advanced manual dissolution testing, the DTs of the DT 720 series and the DT 820 series can be purchased and later upgraded by our software to either an Online, an Offline or an On-/Offline System.

      If you want to know more, check out our products page:

      All ERWEKA Dissolution Tester for USP 1, 2, 5 and 6

    • Dissolution Systems for USP 1, 2, 5 and 6

      Dissolution Systems for USP 1, 2, 5 and 6

      ERWEKAs Dissolution Systems various stages of automation for your laboratory.

      Do youalready use seperate analytic devices and are looking to automate your dissolution testing? Then our DT Offline System is the right companion for your semi-automated dissolution testing.

      Are you looking for automated dissolution testing and analytics? Then we can offer you online systems with a great variety of UV/Vis analytics, all controlled by our advanced Disso.NET 2018 with integrated, 21 CFR part 11 compliant audit trail.

      For those customers with HPLC analytics, we can offer our Dissolution On-/Offline System with HPLC. With the help of our Disso.NET 2018 with integrated, 21 CFR part 11 integrated audit trail, this system can connect to many HPLCs analytic systems.

      Dissolution Offline System

      Dissolution Online System

      Dissolution On-/Offline System

    • RoboDis II - Fully automated Dissolution System

      RoboDis II - Fully automated Dissolution System

      RoboDis II is the only parallel-working, fully automated dissolution test system currently on the market. All stages of the dissolution processes are computer-controlled and therefore carried out entirely without user intervention. The key element of the fully automatic system is the Disso.NET software developed by ERWEKA, which handles all system functions, including the precise movement of the robot arm, control of the analytic devices, data processing and full documentation.

      In its standard configuration, RoboDis II tests up to 10 batches in accordance with USP methods 1 (Basket) or 2 (Paddle). The parallel sampling approach enables very short cycle times for recording of detailed drug release profiles to be selected by the user. Integrated System Suitability Tests (SST) and video monitoring ensure a high degree of reliability. Like all ERWEKA products, RoboDis II is fully USP/EP/JP compliant.

      More about RoboDis II - our fully automated dissolution system

    • USP 4 - Flow-Through Cell

      USP 4 - Flow-Through Cell

      The new ERWEKA flow-through cell tester DFZ II can be used for various applications thanks to its wide range of available cell types, e.g. for testing poorly soluble products or low-dose formulations with sustained release.

      Innovations as the new cell design with increased leak-tightness and the optimized tubing system with quick locks allow a fast preparation and implementation of dissolution tests. The new leaner cell bodies ensure an improved cell warming and can be heated individually. All USP 4 DFZ II systems can be easily controlled with the Disso.NET USP 4 dissolution software via a controller.

      More about USP 4 DFZ II

    • Other dissolution tester - USP 3/7, Chewing gum tester

      Other dissolution tester - USP 3/7, Chewing gum tester

      Next to our standard dissolution testers, we offer special devices for more specific dissolution testing: BioDis RRT 10 for USP 3 and USP 7 testing and the Chewing Gum Tester DRT for chewing gum testing.

      More about Chewing Gum Testing

      More about BioDis RRT 10 for USP 3 and USP 7 testing


    Physical Testing Product Range:
    From tablet hardness to disintegration, friability, tapped density and more.

    From manual to fully automated testing - we provide the physical testing equipment.


    • Hardness Testing - manual to fully automated

      Hardness Testing - manual to fully automated

      ERWEKA offers the full range of hardness testing equipment - manual, entry level devices such as the TBH 125, semi-automated 4-parameter tester such as the TBH 425 and fully automated solutions with additional software support (with 21 CFR part 11 conform Audit Trail) such as the EasyCheck and MultiCheck 6.

      If you want to know more, check out our products page:

      All ERWEKA Hardness tester - from manual to fully automated

    • Disintegration Testing

      Disintegration Testing

      ERWEKAs Dissolution Systems various stages of automation for your laboratory.

      Do youalready use seperate analytic devices and are looking to automate your dissolution testing? Then our DT Offline System is the right companion for your semi-automated dissolution testing.

      Are you looking for automated dissolution testing and analytics? Then we can offer you online systems with a great variety of UV/Vis analytics, all controlled by our advanced Disso.NET 2018 with integrated, 21 CFR part 11 compliant audit trail.

      For those customers with HPLC analytics, we can offer our Dissolution On-/Offline System with HPLC. With the help of our Disso.NET 2018 with integrated, 21 CFR part 11 integrated audit trail, this system can connect to many HPLCs analytic systems.

      Disintegration Tester

    • Friability & Abrasion, Tapped density testing

      Friability & Abrasion, Tapped density testing

      The ERWEKA SVM series has been designed to measure tapped volume and tapped density of powders, granules and similar products. It is available for holding one or two glass cylinders and works according USP method 1 (300 strokes/min; stroke height 14 mm) or USP method 2 (250 strokes/min; stroke height 3 mm), which is equal to Pharm.Eur. and DIN ISO EN 787/11 requirements.

      The TAR series is a USP/EP/JP compliant ERWEKA unit for testing friability and/or abrasion.

      Both devices are robust, manual tester built with the renowned ERWEKA quality.

      More about the SVM tapped density tester

      More about the TAR friability and abrasion tester

    • Granulate flow testing

      Granulate flow testing

      ERWEKAs Granulate Flow tester measure flow time of pre-defined sample weights of granule. We offer granulate flow tester in various automation levels - from manual to fully automated. The high-end GTB measures the angle of repose according to Pfrengle with an integrated laser measurement system.

      More about our Granulate Flow Tester

    • Blister density tester, suppository testing

      Blister density tester, suppository testing

      ERWEKA offers a wide range of suppository tester: disintegration tester, hardness tester, melting point tester and penetration tester.

      For testing leakage in blisters and other packaging forms, we also offer the VDT/S vacuum leak tester.

      Suppository tester range

      VDT/S Vacuum Leak Tester