The TAR II is the next step in intelligent, upgradeable USP / EP / JP friability and abrasion testing. Its unprecedented flexibility and sophisticated features such as TestAssist and the direct transfer of balance data make the TAR II the most advanced friability tester on the market.
The high-resolution 7-inch touch display with modern user interface draws the user's attention to the most important task that the TAR II has to perform - 100% USP- / EP-compliant friability testing. TestAssist's automatic calculation functions guide the user through the testing process as quickly as possible, step by step, and the advanced scale connection function transfers and calculates the data directly.
In addition to its user-friendliness, the TAR II is the most flexible friability tester we have ever produced. It can be configured with one or two test stations and the optional smart scale - and best of all, everything can be retrofitted at a later date. A stand for the 10° position required by USP / EP is also included.
One or two test stations
Intelligent balance connection with data transfer
TestAssist with automatic calculation
100% USP / EP / JP compliant
Our testing assistant has been customized to make friabiliy and abrasion testing as easy and fast as never before. With its three testing modes - revolutions, time and USP test, TestAssist offers flexible options. It ensures in all three modes that every parameter is set up correctly. In USP testing mode, TestAssist automatically calculates the results and even triggers the repetition of the test according to USP guidelines.
TestAssist saves time and ensures parameter validity in each test.
The optional direct balance connection offers a seamless integration of supported balance into TestAssist. When setting up a test with TestAssist and a connected balance, TestAssist prompts the user to place the samples on the balance. It then automatically recieves the balance data, using it for its fully automated calculation.
This further speeds up the testing and eliminates another possible error source.
The following balances are supported:
TAR II TestAssist automatically generates reports after each test. These reports can be automatically printed. The last 10 test reports can be recalled and printed out again.
The TAR II can be configured with 1 or 2 test stations - but it can also be upgraded from 1 to 2 at a later date. The optional intelligent weighing function can be retrofitted as well.
This makes the TAR II the most flexible and future-proof friability and abrasion tester we have ever built.
| Weight | 10 kg (without drums), 11.7 kg (1 drum), 13.4 kg (2 drums) |
| Dimensions (H x W x D) | 278 x 237 x 370 mm |
| Voltage | 100-240 V; 50-60 Hz |
| Fuses | 2 x 3.15 A |
| Interfaces | LAN, 2 USB, RS-232 |
| Protection class | I/EN 61140 |
| Protection type | IP 21/IEC 529 |
| Number of drum receptions | 1 / 2 |
| Control | 7" high resolution touch display |
| Speed control | Yes |
| Speed range | 20 to 100 min |
| Test duration, running time | Continuously adjustable, 30 s to 9 h 59 min 59 s |
| Test duration, number of revolutions | Continuously variable, 1 to 9999 revolutions |
| Compatible printers | Brother HL-L2370DN, Canon i-sensys LBP162dw, HP LaserJet Pro M203dne, HP LaserJet Pro M402dne, Kyocera ECOSYS P2235dn, Oki 431d, Oki B432dn, Martel MCP7870 |
| Ambient temperature in operation | +10 °C to +30 °C (Ambient temperature at least 5 °C lower than test temperature) |
| Storage and transport temperature | -10 °C to +55 °C |
| Relative humidity | 25 to 80 % non-condensing |
| Airborne sound emission | The A-rated emission sound pressure level at the workplace is less than or equal to 70 dB(A), provided that it is not influenced by other equipment or similar in the installation environment. |
